View TIP3224PCA_4259554.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TIP
Vishay Dale
Infrared Touch Panels
With Controller
FEATURES
* Fast response time * Flexible operating modes * User transparent * Rugged construction * Sealed for environmental resistance * Immune to high or changing ambient light * RS-232C interface * Pre-assembled - no assembly or disassembly required to mount display TIP products are infrared touch panels designed to fit most flat panel display technologies. The touch panels are a matrix of infrared diodes and detectors, scanning electronics, micro-processor controller, bezel/optical filter assembly and hardware to mount the touch panel and controller to the flat panel display. These touch panels are ideal for many applications including medical instrumentation, machine or process controls, point of sale devices, public information displays, banking and military. Vishay Dale(R) TIP touch panels have a unique patented scanning l9ogic system that makes them virtually immune to most lighting environments. Optional PC based software (TBDriver, a DOS mouse emulator; and TWDriver, a Windows(R) mouse emulator) provide simple touch panel integration. Windows(R) is a registered trademark of the Microsoft Corporation.
ELECTRICAL SPECIFICATIONS
Voltage: + 12 VDC 5%. Current: 400 mA typical.
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature: 0C to + 55C. Storage Temperature: - 55C to + 85C. Relative Humidity: 10 - 90% non-condensing.
INTERFACE SPECIFICATIONS
Type: RS-232C. Data Rate: 300, 1200, 9600 baud and auto baud. Word Format: 8 bits, no parity, 1 start bit, 1 stop bit.
ORDERING INFORMATION
TIP MODEL 3216 MATRIX FA DISPLAY DESIGNATOR A FILTER * XXX DASH NUMBER (If Required)
TOUCH PANEL MATRIX TOUCH POINTS 3216 3220 63 x 31 63 x 39 PIXELS 512 x 256 640 x 400
DISPLAY TECHNOLOGY MANUFACTURER PART NUMBER DESIGNATOR ELD ELD Finlux Planar Finlux Planar Sharp Sharp Planar MD512.256 EL6648MSS MD640.400 EL8358HR LJ640U27 LJ64ZU49 EL7768MS FA PA FB PB SA SB PC
A = Non polarized, gray B = Polarized, gray C = Non polarized, amber D = Polarized, amber S = Special - Contact factory
3224 3526
63 x 47 69 x 51
640 x 480 640 x 480
ELD ELD
*Other user specified filters will be designated as "S". Contact factory for availability. Any "S" filter designation will require a factory assigned dash number suffix. Filters A-D are plastic. Glass filters may be available on selected models. Note: Many additional touch panel options available to fit color LCD's and other display technologies. Please contact factory for assistance. www.vishay.com 2 Document Number: 37025 Revision 05-Dec-00
TIP
Vishay Dale
GENERAL DESCRIPTION
Each Vishay Dale(R) touch panel has infrared LED emitters and detectors along the X-- and Y-- axis, forming a grid of infrared light beams across the face of the display. The first two numbers of the TIP "matrix" number specify the number of vertical beams and the last two numbers specify the number of horizontal beams. The controller scans the emitter/detector pairs one at a time and determines whether both X and Y beams are blocked, indicating that a finger or stylus is present. (When beams are blocked on only one axis, they are ignored and not reported to the host.) The controller determines the coordinates of the touch point and reports them to the host computer. By interpolating a "virtual" beam between two physical beams, the number of touch points on each axis is effectively doubled. When an odd number of beams along either axis is blocked, the coordinate of the center physical beam is reported. When an even number of beams is blocked, the coordinate of the virtual beam in the center of the blocked beams is calculated and reported. The touch controller supports ENTER, EXIT, CONTINUOUS and TRACKING report modes or combinations of these modes. The controller also has a beeper output. Hardware handshaking, software handshaking, baud rates and auto-baud features are jumper selected. The user initializes the desired report modes and requests reports when needed. Several optical filters are standard to provide the most cost effective filter for each application. "Non-standard" filters may be specified as well. The filter increases the contrast ratio of the display and protects the display face and electronics. Vishay Dale(R) can assist in recommending the optimum filter based on years of experience as a display manufacturer. The perimeter of the filter is bonded to the bezel and a bezel to front panel gasket is includedto provide a splash proof seal.
PIN DESCRIPTION
J1 DATA CONNECTOR
PIN 1 3 5 7 9
SIGNAL RD (to touch panel) + 12 (optional) CTS RTS Ground
PIN 2 4 6 8 10
SIGNAL Ground + 12 (optional) Reserved Reserved TD (from touch panel)
J5, J6 POWER CONNECTOR PIN 1 2 PIN 1 2 3 SIGNAL + 12 VDC GND SIGNAL GND Beeper Signal (active low) + 5 VDC
J4 AUDIO FEED BACK CONNECTOR
COMMAND SET (A bridged)
11H 13H 20H 21H 22H 23H 24H 25H 26H 27H 28H 29H 2AH 2BH 2CH 2EH 2FxxH 34H DC1, Ctl Q, XON Software handshaking DC3, Ctl S, XOFF, Software handshaking Enable EXIT point mode Disable EXIT point mode (default) Enable ENTER point mode Disable ENTER point mode (default) Enable CONTINUOUS mode/disable TRACKING Disable CONTINUOUS mode (default) and TRACKING Enable touch panel Disable touch panel (default) Request Failed beam report Enable automatic report transfer Disable automatic report transfer (default) Request one coordinate report Reset touch panel Disable beeper (default) Sound beep, xx = duration (00H to FFH) Enable TRACKING mode/disable CONTINUOUS
MATING CONNECTORS
DALE J1 J5, J6 J4 280105-02 280108-07 280108-06 OTHER AMP 746288-1 MOLEX 22-01-3027 housing, 08-50-0114 terminals MOLEX 22-01-3037 housing , 08-50-0114 terminals
DIMENSIONS in inches [millimeters]
Touch Frame
VIEWING AREA
C D
A
B
MODEL 3216 3220 3224 3526
B 9.608 [244.04] 9.748 [247.60] 9.680 [246.0] 10.404 [264.26]
C 4.86 [123.44] 6.238 [158.45] 6.687 [169.85] 7.311 [185.70]
D 5.67 [144.02] 6.950 [176.53] 7.086 [179.98] 7.532 [191.31]
VIEWING AREA 7.9 x 4.1 [200.66 x 104.14] 8.0 x 5.2 [203.20 x 132.08] 7.8 x 5.9 [198.12 x 149.86] 8.6 x 6.4 [218.44 x 162.56] www.vishay.com 3
Document Number: 37025 Revision 05-Dec-00
TIP
Vishay Dale
DIMENSIONS in inches [millimeters]
TIP 3216 with Finlux 512 x 256 Display
Bezel
10.0 [254.0] Ref. 6.00 [152.40] Max. Customer's Front Panel
3.544 [90.02] Ref. Detail A
Note: Detail A shows Display and Touch Panel Assembly after installation to customer's front panel.
Gasket Touch Frame Assembly Finlux Display Locking Screw Locking Screw Touch Panel Controller
10.236 [259.99] Ref.
2.14 [54.36] Max.
TIP 3220 with Sharp 640 x 400 Display
7.06 [179.32] Max.
Gasket 9.86 [250.44] MAX. Touch Frame Assembly Mounting Hardware Sharp Display Assembly Touch Panel Controller
2.32 [58.93] Max.
TIP 3220 with Planar 640 x 400 Display
7.06 [179.32] Max.
10.60 [269.24] Max.
2.00 [50.80] Max.
Gasket Touch Frame Assembly Planar Display Assembly Touch Panel Controller Display DC/DC Converter
Contact Factory for Models not Shown. www.vishay.com 4 Document Number: 37025 Revision 05-Dec-00
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 18-Jul-08
www.vishay.com 1

▲Up To Search▲

Price & Availability of TIP3224PCA

	To Download TIP3224PCA Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .